Haining Onosi New Energy Co.,ltd.

Home > Products > Solar water heater > Split pressurized

    Split pressurized solar water heater

    • Serial number: ONS-SP01
    • Frost resistance:-
    • Condensing side:-
    • Brand: ONOSI or OEM
    • Payment: T/T or L/C
    • Delivery time: 10 days
    • Minimum order: 1 set
    • Shipping port: Shanghai or Ningbo

    Product name:Split pressurized solar water heaterModel number:ONS-SP01 Description:Split solar system is a kind of indirect heat exchange, forced separation of two-cycle pressure hot water system

    1. Detailed information
    Product name:Split pressurized solar water heater
    Model number:ONS-SP01
     
    Description:
    Split solar system is a kind of indirect heat exchange, forced separation of two-cycle pressure hot water system. it realize perfect combination between the solar collector and architecture. The tank’s installation is very flexible, the vacuum tube not fouling, not fry , pressure,supply hot water all-days, and automatic operation and so many features. it represents the development of solar energy .
    The solar water heating system is mainly composed by solar collector, starage water tank,solar work station and pipe the four parts. Solar collector is combined by superconductive heat pipe solar thermal tube which is our patent technology products and combination. It own highest thermal efficiency. All-glass vacuum tube solar collector’s absorption rate is more than 0.94. When the solar irradiance reach 800 W / ㎡(ect. In the spring or autumn when the weather is fine), One single heat pipe can heat the water in the chest and make them reach to 90℃ in 2.5 hours, in the condition of the basis temperature of water is in normal. (Few effect comes from environment  temperatur). Insied of storage hot  water tank is made up with stainless steel tank.The insulation layer comes form high heat preservation material polyurethane foam,which greatly enhancing heat preservation effect and service life. Thus ensuring the solar heating water system in the minus 50 ℃ also can work as usual.
     
    Features:
    1)collector and storage tank is separation, pressure operation. The starage tank can be place anywhere you wanted.
    2)Circulation pump make the medium cycle in the circulation line. Through the heat exchanger, it transfer the heat  ennergy collected by solar collector to heat storage tank.
    3)Metal heat pipe collector, no water insied the vacuum tube, double-loop system, anti-freeze , can be used all seasonal. Even under the Minus 50 degrees environment, it also can work very well.
    4)Using intelligent controller, automatic reliable operation. Fixed temperature, and maximum temperature setting, constant temperature timing heating and power set data memory protection, 24 hours hot water supply.
    5)Collectors can be installed in the balcony, the south wall, slope roof, the canopy, the position such as inclined housetop, any place, split design, elegant appearance.
     
    MetInfo enterprise content manager system | MetInfo CMS
     
    Parameter table:
     
    MetInfo enterprise content manager system | MetInfo CMS
     
    If you need more detailed information,please contact us!

     

     

    MetInfo enterprise content manager system | MetInfo CMS

     

    MetInfo enterprise content manager system | MetInfo CMS

     

    MetInfo enterprise content manager system | MetInfo CMS